Lots of people involved in woodworking awhile are in perfect shape while they are going to purchase their first wood lathe. Several of the things to search for in a wood lather are the same things one finds for in other woodworking equipment such as heavy material and quality of finish. However, here are a few things to look for as a wood lathe is different from the other power equipments in a classic woodworking shop.
At first, find for a lathe that is built with the intention of absorbing vibration. Numerous of modern tools are built of aluminum or steel. Either can be made to have great strength in comparison with lightness, but either material needs expensive and extensive engineering to absorb vibration. This is an issue due to the way in which wood is handled on the lathe in comparison with something like a table saw or band saw. In the latter cases wood, commonly in the form of uniform boards, is put on a stable table and fed by a blade. There is little vibration involved supposing the blade is balanced.
Wood lathes, alternatively, hold the wood and turn it at somewhat high speeds. Often the wood is unbalanced and rough. This is something similar to driving a lopsided tire at highway speeds. Just like the car will sway and rattle so will the lathe. In the case with a wood lathe, cast iron is the reply and even the lowest priced beginner’s lathes will have a few models with tail stocks and cast iron head. At a bit higher price even the ways will be cast iron and it is commonly worth it. Several wood turners have started, however, on a lathe model with a single way made of a steel tube and yet with tail stocks and cast iron head. These have worked rather well for several turners.
The finish requires being sufficient on the head and tail stock and great on the ways. If the ways are finished in a proper way the tail stock and equipment rest will move freely and well. This makes woodturning a real pleasure. Alternatively, a poor finish on the ways makes it a trouble to move either one and hassle to a wood turner. Make certain the head and tail stocks line up. Put up a center for each one and bring them together. They should line up both horizontally and vertically. A few lathes will have procedures to line up the centers however this is not often seen in beginner’s models.
All that is required now is a good stand. Many of beginner’s level wood lathers are a defectively made pressed steel one or have no stands. Making a solid out of the metal or wood is the preeminent bet in either case. These guidelines should help in selecting a first wood lathe. Just keep in mind that, like many tools, it is simple to grow out of the first lathe thus opting one with a good resale worth helps too.